Ideal for front doors, side & back doors, garage entry doors, etc.

Features:

• Power: DC6V, 4 AA (1.5v, LR6) alkaline batteries required.
• Material: zinc alloy die casting
• Surface: satin nickel
• Suitable material: suitable for a wooden door thickness of 1-3/8" to 2" (35mm-51mm)
• Latch: 2-3/8" to 2-3/4" (60mm-70mm) adjustable latch
• Lock group: 5 beads, one-line CI lock group
• Applicable ambient temperature: -20°C -70°C (without battery)
• Applicable ambient humidity: 30%-90% (RH) (without battery)

Installation Note:

• Do not use an electric screwdriver during installation or over-tighten the screws.
• The black hub of the latch must be in the lower position when fitting the latch into the latch hole.
• Fit the alignment of the deadbolt latch and strike plate.
• Install cylinder into the deadbolt keypad assembly with tailpiece in horizontal position inserted through the hub.
• When installing the receiver assembly, the thumb turn piece is opposite to the latching side and ensures the deadbolt tailpiece is engaged with the turn piece.
• Do the door handing identification process first after installation. Make sure the IC wire is connected firmly and the batteries are installed correctly and alive.

Programming Note:

• Before programming, do the door handing identification process first, the lock needs to learn if your door is a Right-Hand door or a Left-Hand door.
• Your lock can only be programmed in the unlocked position, every programming step should be done in 6 seconds.
• If you delete all user code the keypad will no longer open the lock, you must use the key to enter the lock.
• If you disable all user codes the keypad and auto-locking will no longer open the lock, you must use the key to enter the lock.
• After restoring default settings, you must run the operation door handing identification process again before programming any other function.

As described in our Privacy Policy, we collect personal information from your interactions with us and our website, including through cookies and similar technologies. We may also share this personal information with third parties, including advertising partners. We do this in order to show you ads on other websites that are more relevant to your interests and for other reasons outlined in our privacy policy.

Sharing of personal information for targeted advertising based on your interaction on different websites may be considered "sales", "sharing", or "targeted advertising" under certain U.S. state privacy laws. Depending on where you live, you may have the right to opt out of these activities. If you would like to exercise this opt-out right, please follow the instructions below.

If you visit our website with the Global Privacy Control opt-out preference signal enabled, depending on where you are, we will treat this as a request to opt-out of activity that may be considered a “sale” or “sharing” of personal information or other uses that may be considered targeted advertising for the device and browser you used to visit our website.